The correct installation and application of the multi-functional cyclone mud cleaner can rid of the harmful solid phase effectively in the drilling fluids, control the viscosity, recover the useful solid phase, it is fairly important to extend the lifespan of the mud cleaner and reduce the labor intensity of the field workers.

(1) The multi-functional cyclone is installed behind the shale shaker and above the one or two drilling fluids tanks.

(2) The drilling fluids which flow into the mud cleaner must processed by the shale shaker.

(3) Plugged, after the motor starting, the direction of rotation of the motor and the direction of the sign of belt cover must be consistent.

(4) Firstly, air transportation the rotating shale shaker, then check up it, if found has unusual noise, we should stop to overhaul.

(5) Tightenting the screen, pressuring the spiral, testing pressure the screen by hand, then test running 2-3min, the screen should not have separate oneself from the strip, then appropriate pressure the spirals, inspecting the each tensioning spring, the length should be basically the same.

(6) In the process of the using screen, if we need to clean the cumulative sand on the screen, we can’t use spade to sweep the screen.

(7) We should wash the screen at least per shift, prevent the viscous things or sand on the screen are maybe blocked the mesh, influence the screen normal use.
 

KOSUN Drilling Mud Cleaner
 

(8) When stop to use it , we should closed sand pump firstly, keep the shale shaker rotating 3-5min and wash the screen in time to keep the screen clean, the closed the shale shaker.

(9) We should infusing butter on the bearing of the exciter once a day at least.

(10) In the process of transportation or lifting, we can’t put the hard things on the screen or trample by foot.

(11) Preventing the sundry enter into the swirler.

(12) We should often wash the discharge grove and the baseboard of the shale shaker.

(13) According the stratum and the property of drilling fluid to select the screen, if the viscosity is high and the sediment concentration is big, we should select the less mesh screen.

(14) The use method of the discharge pipes

The use of the cyclone tube; when the feed liquid pressure equal to the rated pressure, turn off the valve on the overflow tube, make the tubular value of the overflow pipe is 0.01-0.03mpa. When the feed pressure below the rated pressure, adjust the valve on the overflow, make the tubular value of the overflow pipe is 0.02-0.05mpa.

KOSUN, as the pioneer of China oil drilling solids control industry, can manufacture not only high efficient drilling fluids mud cleaners, but can also provide other solids control equipment, such as shale shaker, desander, desilter, decanter centrifuge, vacuum degasser and mud tank, etc.