Mud agitator is functioned as keeping stability of drilling mud performance. So the impeller mixing speed must make sure that the raising speed of the solid phase is bigger that the falling speed of the solids phase. Accounting for this point, generally the impeller speed toward the processing capacity is fixed. One time mixing of the drilling mud in toward the fixed processing capacity is called cycling time. According to international files, the cycling time usually stay between 30-90 seconds. In solids control system, storage tank is always set for each processing unit and desilting is needed, so the cycling time usually get the maximum value. To most circumstance, 60 seconds is selected as the standard of deciding the quantity of the mud agitators.
 

 

Mud Gun is functioned as hitting deposited solids phase at the bottom of the mud tank by the high speed flowing fluid. When the mud agitator stopping work for a while and then need restart, mud gun could reduce the starting force by the mud agitator which supports protection measure to normal mixing processing for mud agitator. Generally, high pressure mud gun is with 4-6 Mpa pressure and low mud gun is with 0.2-0.3 Mpa pressure. The working pressure is decided by the quantity of the mud agitator.
 

 

Mud jet Hopper. In order to weight the drilling mud or making up little amount of drilling mud, jet mud hopper is always installed in the mud pumps. Discharging pipes should set as far as storage mud tank and pumping tank to deal with well accidents. 
 

 

Piping lines arrangement. In the deep well drilling, in order to resolve well accident in time, piping lines should be arranged conveniently enough to discharge or pump drilling mud in storage tank. And discharging fluids form the mud jet hopper mixer could transfer mud to storage tank. All of those mentioned are controlled by the piping lines and valves.   

KOSUN is capable of providing customers with such three series as oil & gas drilling solids control equipment, decanter centrifuges, mud gun,  mud agitator, mud cleaner, vacuum degasser, shale shaker, jet mud mixer, desander, desilter and drilling waste treatment equipment, including 25 categories of products, which are extensively used in oil & gas drilling and workover, coalbed methane drilling, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, industrial wastewater treatment, environmentally friendly sewage treatment, waste oil recovery, purification treatment, etc.