The Tips for Drilling Fluids Shale Shaker Operation

Dec 23, 2013

The drilling fluid shake shaker is a important solids control equipment in drilling fluids processing system,there are some using tips for it in the operation process.

Replace Shale Shaker Screen Process

To make shale shaker screen installation and uninstall more easy, designed fast installation structure. The structure is a special type use tension wedge to fix screen. Refer to fig IV. The structure including shelve strip, wedge. The first screen installation, we should inspect the screen dimension, such as 1250±2mm, the tolerance can’t over it. After fixing rubber strip, then put screen, shelve strip from shaker back (drilling fluid input), and push wedge evenly on two sides use hammer to push or tension wedges, make two sides identical. Tension each screens subsequently.

Shaker screen replacement, during operation, when screens broken or need to be replaced , please refer to fig IV. Get wedge out, then bring out screen, check if rubber strips are sufficient; then put new screen on shaker deck and tension it steadily. The replacement is finished.
 

shale shaker
 

Note: During shaker operation, the tension wedge may appear loose, operator should inspect shaker screen frequently and push or tense the wedge by hammer.

Shale shaker deck angle adjustment

Shaker deck angle adjustment . There are lifter, pipe, lifter pipe, scale indicator, scale, connection plate, etc. When we make adjustment, handle wheel rotary by clockwise, shaker deck angle will be larger; handle wheel rotary by anti clockwise shaker deck angle will be less.

Shale shaker output angle adjustment can be operated under running and off. When finish the shaker deliver it, the shaker deck is 0°. When user operate shaker, according to drilling mud property and flow rate on job site, and adopts same screen, the angle is higher, the treating performance will be better while treating capacity will be higher. When drilling fluid is leaking on shaker deck, increase deck angle can get rid of fluid flow away.

Angle range: -1 ~ +3°, rated angle is 0~ +5°

KOSUN oil drilling mud shale shaker is a stable and reliable product,they are able to be used for many kinds of drilling.KOSUN is a professional manufacturer with more than 20 years' experience of solids control equipment and drilling fluid solids control system.The products of KOSUN including shale shaker, shale shaker screen, desander, desilter, vacuum degasser, centrifugal pump, submersible slurry pump, shear pump,mud agitator, mud gun, drilling fluid mud cleaner, decanter centrifuge, jet mud mixer, mud tank, diesel tank, water tank and complete solids control systems,etc.